MultiMotion Dynamic Corrective System Joint
MultiMotion Dynamic Corrective System Joint
MultiMotion Dynamic Corrective System Joint
Functional limitations: joint mobility and muscle tone.
Intended use: Treatment of correctable contractures.
Intended use: Treatment of correctable contractures.
The corrective joint allows efficient treatment of dynamically correctable contractures. Contractures with a neurological cause are treated according to the LLPS principle, and contractures caused by injury or postoperatively can also be treated statically during rehabilitation as desired.
The dynamic correction system joint ensures fast efficient and adequate treatment of contractures due to neurological and orthopedic diseases. The system joint is used in orthoses - both for children and adults.
MultiMotion joints are available in sizes medium and large. In addition, these components come in configurations with a
modular bar adapter or with integrated bars and/or T-bar. In addition to an alignment unit, various types of joint bars are
available as accessories for MultiMotion.
modular bar adapter or with integrated bars and/or T-bar. In addition to an alignment unit, various types of joint bars are
available as accessories for MultiMotion.
Article/size chart
{Label:Open}
Article | Unit | Size | Bar width | Joint thickness | Offset T-bar | Height floor to hinge pivot point | Weight | Material | Housing diameter | Maximum torque | Proximal upright connection | Distal upright connection |
---|---|---|---|---|---|---|---|---|---|---|---|---|
MM04M-12 | stuk | medium | 12 mm | 19 mm | - | 64 mm | 125 g | steel | 36 mm | 4,1 Nm | Bar adapter | Bar adapter |
MM04MT-12 | stuk | medium | 12 mm | 19 mm | 10 mm | 56 mm | 154 g | steel | 36 mm | 4,1 Nm | Bar adapter | Integrated T-bar |
MM04B-12 | stuk | medium | 12 mm | 19 mm | - | 270 mm | 210 g | steel | 36 mm | 4,1 Nm | Integrated bars | Integrated bars |
MM04BT-12 | stuk | medium | 12 mm | 19 mm | 10 mm | 56 mm | 125 g | steel | 36 mm | 4,1 Nm | Integrated bars | Integrated T-bar |
MM05M-16 | stuk | large | 16 mm | 24 mm | - | 75 mm | 268 g | steel | 50 mm | 8,4 Nm | Bar adapter | Bar adapter |
MM05MT-16 | stuk | large | 16 mm | 24 mm | 10 mm | 73 mm | 303 g | steel | 50 mm | 8,4 Nm | Bar adapter | Integrated T-bar |
MM05B-16 | stuk | large | 16 mm | 24 mm | - | 250 mm | 405 g | steel | 50 mm | 8,4 Nm | Integrated bars | Integrated bars |
MM05BT-16 | stuk | large | 16 mm | 24 mm | 10 mm | 73 mm | 268 g | steel | 50 mm | 8,4 Nm | Integrated bars | Integrated T-bar |
Features
{Label:Open}
- Torque output possible in flexion or extension
- Range of Motion: +95° to -95°
- Adjustable flexion and extension stops
- Locking- and unlocking possible in virtually any position
- Torque Output Infinitely adjustable
- Adjustable 0 point
- Medial and lateral access to torque output set screw
- Material: steel/stainless steel, plastic
Product Functions
{Label:Open}
- Infinitely adjustable dynamic extension or flexion of the joint
Benefits in achieving therapy goals
{Label:Open}
- Improvement/rehabilitation of joint mobility
- Secure and step-wise joint mobilization
- Elongating/mobilizing spastic musculature
- Strengthening the musculature
- Improvement of the resting position
- Prevention of cartilage damage and ulcers
Indications / Diagnoses
{Label:Open}
- Amputation (ICD10: T14.7)
- Apoplexy (CVA) (ICD10: I64)
- Cerebral palsy (ICD10: G80.9)
- Cranial cerebral trauma (ICD10: S06.9)
- Dystrophies
- Endoprosthesis implant
- Fracture (ICD10: T14.2)
- Ligament rupture (ICD10: T14.-)
- Multiple sclerosis (ICD10: G35)
- Paresis (ICD10: G83.9)
- Spina Bifida (ICD10: Q05)
Contra indications
- Ankylosis (ICD10: M24.69)
- Fibrosis (ICD10: M35)
- Ossification (ICD10: M61.9)
Documents
{Label:Open}
Accessories
{Label:Open}
T-Bar
Intended use: T-bar for correct alignment of joints on the positive Cast.
MultiMotion Dynamic Hip Abduction System for children
Intended use: To provide a dynamic stretch to the coronal plane (the adductors), while statically allowing the practitioner to set the rotation angle of the hip.
Joint Bars
Intended use: all bars are supplied pre-drilled for optimum fixation. The bars have a high rigidity and are available in two different sizes and several designs.
MultiMotion alignment unit
Intended use: Alignment unit is used for the correct alignment of the MultiMotion System Joint onto the cast positive.
Spare Parts
{Label:Open}
MultiMotion flexion/extension stops
MultiMotion spare part: flexion/extension stops
MultiMotion Housing
MultiMotion Spare Part: Housing
MultiMotion Central Housing Screw
MultiMotion spare part: Central Housing Screw
MultiMotion Washer
MultiMotion spare part: Washer
MultiMotion Force Output Indicator Disc
MultiMotion spare part: Force Output Indicator Disc
MultiMotion tension spring cassette
MultiMotion spare part: tension spring cassette.
MultiMotion slide ring
MultiMotion spare part: slide ring
STL files
{Label:Open}
Downloads
{Label:Open}